If your sensor was pre-configured by Cobra Climate, getting it online takes just a few minutes.

Steps

1. Power on the sensor by connecting it to a micro-USB power supply.
2. Wait a couple of minutes. The sensor finds the WiFi network automatically.
3. Log in to Cobradash at https://platform.cobradash.com/ and click Sensors in the navigation menu. Your sensor should appear in the list, showing its most recent measurements.

That's it — you're up and running.

Sensor not showing up?

If the sensor does not appear after a few minutes, check the following:

• The WiFi network is reachable and uses WPA security.
• The network allows outbound traffic on port 8883/TCP to the Cobradash message server.

See Network requirements and connectivity for the full list of requirements.

Advanced configuration

If your sensor was not pre-configured, or you need to change network settings, refer to the Cobra Climate Sensor – configuration manual or visit cobraclimate.com/manual.